نیم نگاهی به این دوره

First look to what we want to do...
A short lesion: Specification in PDMS
An important matter... heads and tails!

آنچه در این دوره خواهید آموخت

Design module-Pipework application English Course contents:

1.       First look to what we want to do... (12 min)

·         Running PDMS

·         Using the pipework menu bar

·         Using the design explorer

·         Entering some simple and applicable commands

·         Take a look to site stabilizer

2.       A short lesion: Specification in PDMS (4min)

·         Using the "help" to find meaning of "A3B"

·         Using the pipework toolbar

3.       An important matter... heads and tails! (8min)

·         Check connection of branch head and tail with related commands

·         Using the "Pipe modification form"

·         Setting the head and tail connection for a sample branch

4.       Checking a real project is inescapable! (4min)

·         Checking the compatibility of specification between nozzles and branch

·         Checking the bore between nozzles and branch

5.       Don't forget to check the ratings and bores of nozzles... (4 min)

·         Checking  a real project to find its differences with PDMS sample project 

6.       Let's work (10 min)

·         Setting graphics

·         Creating a pipe

·         Setting specification

·         Using exercise manual

·         Creating a branch

·         Checking head and tail attributes

7.       Creating of components from the pipework toolbar (5 min)

·         Creating components for our branch

·         Introduction to model editor

8.       Creating components via Create menu (7 min)

·         Using "Delete range of piping components" icon

·         Creating components with another form

9.       A simple use of Model editor (7min)

·         A simple way to aligning a component with any other element

·         Rotating components

·         Measuring distances

·         Modifying arrive and leave of components

10.   A general look to Model editor (9 min)

·         Extending pipes with model editor

·         Quick pipe routing

·         Creating components in backward

11.   Alignment of components with use of model editor (8min)

·         Using the positioning control

12.   Creating components at branch tail (8min)

·         Quick pipe routing

·         Creating components in backward before completing branch

13.   Place the component (6min)

·         Creating components using "place" icon in "create components" menu

14.   The second branch (5 min)

·         Display axis on components

·         Creating a new branch

15.   Copying the branch (4min)

·         Use of "Copy offset"

·         Deleting extra components

16.   The last session (3 min)

·         Rotating valves with model editor

·         Using "Align selection/components" and "Direct selection/components" iconsDesign module-Pipework application English Course contents:

1.       First look to what we want to do... (12 min)

·         Running PDMS

·         Using the pipework menu bar

·         Using the design explorer

·         Entering some simple and applicable commands

·         Take a look to site stabilizer

2.       A short lesion: Specification in PDMS (4min)

·         Using the "help" to find meaning of "A3B"

·         Using the pipework toolbar

3.       An important matter... heads and tails! (8min)

·         Check connection of branch head and tail with related commands

·         Using the "Pipe modification form"

·         Setting the head and tail connection for a sample branch

4.       Checking a real project is inescapable! (4min)

·         Checking the compatibility of specification between nozzles and branch

·         Checking the bore between nozzles and branch

5.       Don't forget to check the ratings and bores of nozzles... (4 min)

·         Checking  a real project to find its differences with PDMS sample project 

6.       Let's work (10 min)

·         Setting graphics

·         Creating a pipe

·         Setting specification

·         Using exercise manual

·         Creating a branch

·         Checking head and tail attributes

7.       Creating of components from the pipework toolbar (5 min)

·         Creating components for our branch

·         Introduction to model editor

8.       Creating components via Create menu (7 min)

·         Using "Delete range of piping components" icon

·         Creating components with another form

9.       A simple use of Model editor (7min)

·         A simple way to aligning a component with any other element

·         Rotating components

·         Measuring distances

·         Modifying arrive and leave of components

10.   A general look to Model editor (9 min)

·         Extending pipes with model editor

·         Quick pipe routing

·         Creating components in backward

11.   Alignment of components with use of model editor (8min)

·         Using the positioning control

12.   Creating components at branch tail (8min)

·         Quick pipe routing

·         Creating components in backward before completing branch

13.   Place the component (6min)

·         Creating components using "place" icon in "create components" menu

14.   The second branch (5 min)

·         Display axis on components

·         Creating a new branch

15.   Copying the branch (4min)

·         Use of "Copy offset"

·         Deleting extra components

16.   The last session (3 min)

·         Rotating valves with model editor

·         Using "Align selection/components" and "Direct selection/components" iconsDesign module-Pipework application English Course contents:

1.       First look to what we want to do... (12 min)

·         Running PDMS

·         Using the pipework menu bar

·         Using the design explorer

·         Entering some simple and applicable commands

·         Take a look to site stabilizer

2.       A short lesion: Specification in PDMS (4min)

·         Using the "help" to find meaning of "A3B"

·         Using the pipework toolbar

3.       An important matter... heads and tails! (8min)

·         Check connection of branch head and tail with related commands

·         Using the "Pipe modification form"

·         Setting the head and tail connection for a sample branch

4.       Checking a real project is inescapable! (4min)

·         Checking the compatibility of specification between nozzles and branch

·         Checking the bore between nozzles and branch

5.       Don't forget to check the ratings and bores of nozzles... (4 min)

·         Checking  a real project to find its differences with PDMS sample project 

6.       Let's work (10 min)

·         Setting graphics

·         Creating a pipe

·         Setting specification

·         Using exercise manual

·         Creating a branch

·         Checking head and tail attributes

7.       Creating of components from the pipework toolbar (5 min)

·         Creating components for our branch

·         Introduction to model editor

8.       Creating components via Create menu (7 min)

·         Using "Delete range of piping components" icon

·         Creating components with another form

9.       A simple use of Model editor (7min)

·         A simple way to aligning a component with any other element

·         Rotating components

·         Measuring distances

·         Modifying arrive and leave of components

10.   A general look to Model editor (9 min)

·         Extending pipes with model editor

·         Quick pipe routing

·         Creating components in backward

11.   Alignment of components with use of model editor (8min)

·         Using the positioning control

12.   Creating components at branch tail (8min)

·         Quick pipe routing

·         Creating components in backward before completing branch

13.   Place the component (6min)

·         Creating components using "place" icon in "create components" menu

14.   The second branch (5 min)

·         Display axis on components

·         Creating a new branch

15.   Copying the branch (4min)

·         Use of "Copy offset"

·         Deleting extra components

16.   The last session (3 min)

·         Rotating valves with model editor

·         Using "Align selection/components" and "Direct selection/components" icons


مدرس دوره Design module-Pipework application-PDMS - Oil


مسعود اجوند
تحصیلات: PDMS 12. SP6 AVEVA Kualalumpure Malaysia
موسسه آموزشی هفت اورنگ، تدریس آنلاین PDMS پیشرفته و PFD و P&ID.
شرکت پیمانکاری ارشیا پترو صنعت خاور میانه، سرپرست فنی-مهندسی
موسسه آموزش عالی آزاد نوین پارسیان، تدریس آنلاین PDMS پیشرفته و PFD و P&ID.
شرکت پیمانکاری بین المللی دایلیم-مهندس پایکار پایپینگ
نگاهی کوتاه

ثبت‌نام در کلاس آفلاین

ارائه شده توسط هفت اورنگ
٢ ساعت٣٠٠،٠٠٠تومان

سرفصل دوره Design module-Pipework application-PDMS - Oil


  • First look to what we want to do...
  • A short lesion: Specification in PDMS
  • An important matter... heads and tails!
  • Checking a real project is inescapable!
  • Don't forget to check the ratings and bores of nozzles...
  • Let's work
  • Creating of components from the pipework toolbar
  • Creating components via Create menu
  • A simple use of Model editor
  • A general look to Model editor
  • Alignment of components with use of model editor
  • Creating components at branch tail
  • Place the component
  • The second branch
  • Copying the branch
  • The last session
  بالای صفحه